Rocklin German Car Service Center
Engine-Emissions-Fuel Injection
- Engine Performance Service
- Emission Controls
- Fuel Pump testing
- Fuel injection Service/Component Analysis
- Fuel Tank Replacement
- Fuel Tank/Gas Gauge Sending Unit Service
- Vacuum Leaks Diagnose w/smoke Detection
- Diesel Injection Service
- Fuel Injection System Cleaning/Flushing; Flow Testing; Diagnosis
Air Conditioner Servicing
- R-134a and R12 refrigerant service
- System performance Testing/Fluorescent Leak Detection Dye
- Electrical system failure; tracing provided
- Evaporator, Compresser, Condenser, Drier, A/C Hoses and all components
- A/C Evacuate and Recharge System
General and Specialty Services
- Battery Replacement/Charging
- Exhaust System repairs
- Glass/Window Repair and Replacements
- Seat Bolster Repair and Replacement
- Expert upholstery replacement and repairs
- Headlamp and wheel reconditioning
- Complete Restoring/ Detailing
Electrical Circuits-Switches-Electronics
- Power Windows, doors, seats
- Airbag fault diagnosis
- Seat Mat sensors
- Seat Heaters
- Seat back release cables
- Re-wiring Harness Damage (Optic repair)
- Electrical shorts and tracing
- Dash Gauges, Switch and component servicing/repair
- Keyless Entry System Diagnosis
- Key Fob Re-Programming
- Electronic Key Replacement
- Computer Controlled Circuit Repairs
Brake Systems-Axle-Wheels
- Disc Brake Replacement
- Emergency Brake
- Master Cylinder/Brake Bleeding
- Suspension Inspection/Service
- Differential Repairs
- CV Axle/ Boot Service (Front and Rear)
- Brake Calipers/ Wheel Cylinders
- Brake Fluid Flush
- ABS Diagnosis and Repair
- Power Steering Flush
- Pre-load equipment for factory required BMW & laser alignment system
- High speed electronic wheel balancer for German wheel requirement
Convertible Top/Headliner Repair
- Tension Rope
- Sensors/Switches
- Drive Motor
- Hydraulic Pump
- String Kits
- Rear Windows
- Leak detection/Seals/Adjustments
- Sunroof liners
- Headliner replacement/repair
Runner Up 2018 Best Repair Shop
KFRC Best of SacramentoEuropean Car Pre- Purchase Inspection
70 point mechanical/safety inspection
Full system electronic scan evaluation including written report.
We offer an extremely fair price for an expert evaluation ($175).
The PPI is usually completed before the sale—however; in some negotiations the sale is contingent on the completion of a satisfactory PPI.
European Auto Expert Services
German Car Pre- Purchase Inspection
70 point mechanical/safety inspection
Full system electronic scan evaluation including written report.
We offer an extremely fair price for an expert evaluation ($175).
The PPI is usually completed before the sale—however; in some negotiations the sale is contingent on the completion of a satisfactory PPI.
German Auto Expert Services
Extended Warranty Repairs Welcomed
Extended warranty repairs are welcome. We will submit your claims and receive payment from the extended warranty company to minimize your out of pocket expense.
Servicing with us will not void your factory warranty.
(916) 672-6199
Personal Services
- Shuttle service available: We are happy to get you to your local destination while we are working on your vehicle. Please inform us at time of scheduling your appointment if you wish to take advantage of this service.
- Local vehicle pick-up available: Please inform us at time of scheduling your appointment if you wish to take advantage of this service.
- Early-bird Drop off Box: Located in the front of the shop, for convenient early drop-offs.
- Deferred payment plan available: We are partnered with a deferred payment company that offers 6 months of no interest up to $2450.00 and typically takes 5 minutes to get approved.
BMW and Mini Cooper Maintenance Schedule
Driving pattern and condition based intervals are monitored for the next required BMW/Mini maintenance interval. Parts replacement is outlined in owner’s manual. Complete mechanical vehicle safety check and electrical scans as service interval factory requirement performed.
Low mileage annual oil changes per factory requirement:
Keeping the correct quality oil with factory chemical requirements is essential for long engine life to avoid internal sludge damage. Annual oil change required if mileage for regular service interval is not achieved. Required filters & oils inside the factory maintenance schedules replaced as needed. Complete mechanical vehicle safety check and electrical scans as service interval factory requirement performed.
Bi-annual brake fluid system flush:
Moisture accumulates in the brake fluid and if left too long in system over time, causes corrosion to critical moving parts. These moving parts bind and freeze-up causing stopping distance and safety to be affected.
Tri-annual coolant system flush:
Factory long life factory required coolant/antifreeze (blue) ensures system longevity. Mixing other types of non-factory designed fluid will sludge and become syrup like, causing system collapse and unnecessary added expense. Antifreeze/coolant system protection becomes weak and will not dissipate heat or freezing temperatures as needed. Cooling system left unattended will also corrode associated parts and heavy metal build-up in radiator, heater and engine passages will cause restriction leading to failures.
CBS (conditional based service) per instrument maintenance counter:
This system picks the needed single component as required for replacement or calibration per vehicle monitored system for replacement. BMW and MINI have pre-programmed monitors that can immediately turn on a dash maintenance message for service requirements.
60K-100K Mile Spark Plug service:
Long Life BMW/MINI factory quality spark plugs are required parts and essential for best performance and reliability. Aftermarket plugs can cause internal engine damage and unnecessary repair expense.
100K Fuel Filter Service on most vehicles:
Fine internal filter screens stop dirt particles from entering fuel injection system. Unattended, will cause fuel injector restriction, power loss, reduced fuel mileage and associated part failure.
Transmission Service per factory requirement:
All transmissions, stick or automatic need factory required service with filters, seals and gaskets replaced as design required. Different transmission designs need different service intervals with specific BMW/MINI factory oil requirements. Incorrect fluid type will cause irreversible damage and quick failure. Over extending the transmission designed maintenance schedule causes fluid to become weak, filters become restricted and internal overheating will occur, causing excessive wear. Left unattended, eventual complete failure will occur.
Audi and Volkswagen Maintenance Schedule
Keeping the correct quality oil with factory chemical requirements is essential for long engine life to avoid internal sludge damage. Required filters & oils inside the factory maintenance schedules replaced as needed by mileage. Tire rotation and balance as needed per maintenance requirements. Complete mechanical vehicle safety check and electrical scans as service interval factory requirement performed.
75-80K mile timing belt replacement on required vehicles per amended factory service interval:
Factory branded timing belt parts installed with internal inspection of moving associated components during repair.
Bi-annual brake fluid system flush per factory schedule:
Moisture accumulates in the brake fluid and if left too long in system over time, causes corrosion to critical moving parts. These moving parts bind and freeze-up causing stopping distance and safety to be affected.
Tri-annual coolant/antifreeze system flush per factory schedule:
Full system flush with G++ long life factory required coolant/antifreeze (pink) ensures system longevity. Mixing other types of non-factory designed fluid will sludge and become syrup like, causing system collapse. Antifreeze/coolant system protection becomes weak and will not dissipate heat or freezing temperatures as needed. Cooling system left unattended will corrode associated parts and heavy metal build-up in radiator, heater and engine passages will cause restriction leading to failures.
100K mile fuel filter service:
Fine internal filter screens stop dirt particles from entering fuel injection system. Unattended, this will cause fuel injector restriction, power loss, reduced fuel mileage and associated parts failure.
Transmission service as required by amended factory maintenance interval:
All transmissions (stick or automatic) need factory required service with filters, seals and gaskets replaced as design required. Different transmission designs need different service with specific intervals.
Business Hours
Weekdays: 7:30 - 5:00
Saturday: CLOSED
Sunday: CLOSED
Night Drop: AVAILABLE
Directions
